The control system of
Weifang generators mainly consists of controllers, sensors, actuators, and protective devices. As the core of the entire control system, the controller is responsible for receiving and processing signals from various sensors, and outputting control instructions according to preset logic programs to regulate the operating status of the diesel generator.
Sensors are responsible for monitoring various operating parameters of diesel generators, such as oil pressure, water temperature, speed, etc., and converting these parameters into electrical signals for feedback to the controller. The actuator receives control instructions from the controller and drives the diesel generator to perform corresponding actions, such as starting, stopping, accelerating, or decelerating. The protective device is used to promptly cut off the power supply or issue an alarm in case of abnormal conditions such as overload, short circuit, overheating, etc. in the diesel generator, in order to prevent equipment damage and the expansion of accidents.
The control system of Weifang generator achieves precise control of the generator set through three parts: program control, simulation control, and operation management control. Program control is implemented according to the pre designed operation sequence, usually used for controlling switch values, such as starting and stopping the unit. Simulation control compares the actual values of the operating parameters of the measuring equipment with the set values, and adjusts the corresponding physical quantities of the equipment, such as frequency and voltage regulation. Operation management control calls various automatic devices or corresponding programs based on the actual needs of the load and the requirements of various manually set operating conditions, in order to achieve the goals of safety control and economic operation.
Specifically, the control system of Weifang generators can achieve automatic starting, self switching, and various fault protection alarm functions. When the external power supply is cut off, the control system will automatically start the generator set, ensuring the stability and reliability of the power supply by adjusting parameters such as voltage and frequency.
In addition, the control system can also achieve remote monitoring and control, remotely monitoring the operation data of the generator set through mobile phones or PC computers, conducting fault diagnosis and preventive maintenance, and improving service efficiency and quality.
