1. Use fuel saving and smoke reducing device: Fix the fuel saving and smoke reducing device vertically in the front oil circuit of the fuel injection pump and connect it to a DC power supply. This method can reduce smoke emissions while saving about 5% fuel.
2. Installing an inertia turbocharger: Installing an inertia turbocharger on a diesel generator set can generally increase power by 15% and reduce fuel consumption by 3% to 5%.
3. Wrap toilet paper on the filter element: Wrap 2-3 layers of highly absorbent toilet paper on the oil filter element of the diesel generator set, which can improve the cleanliness of the fuel and reduce fuel consumption.
4. Add foam plastic air filter element: add a layer of 8~20mm thick foam plastic with good air permeability in the two filters of the air filter, which can improve the filtering effect, ensure the normal combustion of oil and reduce oil consumption.
5. Return pipe diversion: Connect the diesel engine return pipe to the high-pressure oil pipe to allow the return oil to enter the low-pressure oil circuit, which can ensure normal combustion and significant fuel saving effect.
In addition, there are some common fuel saving techniques that can be applied to Cummins generator sets:
1. Keep the fuel fully burned: Try to make the fuel fully burned, and the power consumption of the unit should reach 60-80% of the output power of the Cummins generator set. When purchasing Cummins generator sets, the load should not be less than or equal to 80% of the unit's power to prevent excessive fuel supply.
2. Adjust the fuel injection pump: Ensure that the fuel supply of the fuel injection pump is moderate and not too large. At the same time, do not add too much oil to the governor to prevent an increase in fuel supply and unnecessary waste.
Through these methods, the fuel consumption of Cummins generator sets can be effectively reduced and their operating efficiency can be improved.
